MIGRO

**It is recommended that initial pairing to the of the Wi-Fi controller is performed in the same room as your wireless router, this can be accomplished by temporarily energizing the device prior to installing it at the final location of operation** For 2.4 GHz routers See WiFi Pairing Tutorial https://migromifi.com/manuals/ for Dual Band routers that have both 2.4GHz as well as 5GHz please see instructions for pairing using the "compatible mode"... Check that your phone is connected to the 2.4 GHz Wi-Fi on your home router. 2.4GHz is the Wi-Fi band used by the WI-FI Controller because it provides a stronger signal over a longer range compared to a 5GHz band. Your phone has to be on 2.4GHz Wi-Fi so that the pairing works. If your router does not distinguish between 5GHz and 2.4GHz, you may need to check inside the router settings (e.g. http://192.168.1.1/). If you do not know which network you are on, go check your router settings, your router likely provides the same name to both..