NORDISK INDUSTRIFYSIK

Relative Humidity (RH) of concrete or floor screed is measured with single-use sensors, embedded in a building structure or placed above a sample in a container. No external calibration of the sensors is required... Holes are drilled in the building structure and tubes with a rubber sealing flange are inserted into the holes. A sensor is installed at the inner end of each tube or, in case of very shallow holes, in a metal block mounted on the surface of the structure... This website will then calculate relative humidity, corrected for deviation from room temperature, and measurement uncertainty.

Also known as: Nordisk Industrifysik AB

Primary location: Sweden