NETWORK SOLUTIONS

All injectors are torn down and cleaned through a parts washer. All internal parts are inspected for wear and tear. Any excessively worn parts are discarded and replaced. All parts are run through and ultra-sonic parts cleaner to ensure parts are free from dirt and debris. Injector nozzle seats are all stoned lapped and valves are ground and tested to ensure proper spray pattern and flow. If the nozzle is beyond repair we will replace it with a new one. Nozzles are also inspected at that time to verify proper spray pattern, checked to make sure no nozzle holes are plugged and tested for the ability to hold pressure. Injectors are then assembled and bench tested to ensure free rack movement tightness of plunger and bushing and nozzles are also recheck at this time (Detroit diesel "N", "92" ,"8.2L" & "HV" Series). Once the injectors pass QC, they are tested on a calibration machine to get the fuel flow output and then arranged in matched sets of 6 or 8... If you don't see your injector..

Also known as: Network Solutions, LLC

Primary location: Oakdale United States