CARB VENT
Updated 48 days ago
The carb vent filter was designed to keep dust and dirt from wearing out your motorcycle top end. Regular air filter maintenance and oil changes are not enough.....
TIP:1. The tubing can be hard to push over the barbs if it is old, cold, or just a stiff type of plastic tubing. Use a hair drier or a heat gun to heat the ends of the tubing right before pushing it onto the barbs. Another method is to heat up a cup of water in the microwave and dip about 1/2" of the end of the tubing in the hot water for approximately 10-20 seconds to soften it.