PROJECT CONTROLS ONLINE LIMITED - Key Persons

Job Titles:

• Member of the Core Team
• Director - ProjCon, UK / Gm Fb Tw in

Anil Godhawale : Anil has over 16 years of international field and office experience in Project Planning & Scheduling, Cost Engineering, EVA, Risk and Delay Claims Analysis with project values ranging from $10M to $1.5B. Anil has a strong Project Controls background and has worked in all phases of projects in various sectors including Petroleum & Chemicals, LNG regasification & liquefaction facilities, Carbon Capture Units, Power Projects and Pipelines. Anil has contributed to several books on planning and scheduling and is also very active with industry professional associations as a fellow of ACostE (UK), a member of AACEI (USA), a member of APM Special Interest Group (SIG) - PMC (Planning, Monitoring and Control) and a contributor to APM's "Planning Guide". Through AACEI Anil is certified as a Certified Cost Engineer (CCE) and a Planning and Scheduling Professional (PSP) and is a registered member (IEng) of the Engineering Council UK. Anil also assisted CIOB (Chartered Institute of Buildings), UK as member of TDWG (Training Development Working Group) to develop guidelines for accreditation in Time Management. He has various publications under his name and the most widely acknowledged was "Technical paper on Capital Cost Optimization of Power Project through standardization of engineering design" submitted to AACEI in Y2003. Anil holds a degree in Mechanical Engineering and an MBA in Finance Management.

Job Titles:

• Member of the Core Team
• Director of Estimating - Shaw Group, USA / Gm Fb Tw in

Bruce's professional career has entirely served the Engineering / Procurement / Construction / Maintenance industry, specifically in the Petroleum, Petrochemical and Chemical markets. Have accumulated over thirty years experience in Estimating for both domestic and international projects. Began career with Jacobs Engineering in 1980, started at Litwin Engineers & Constructors in 1987, moved to Fluor in 1996 and started at The Shaw Group in April 2010. Personal growth has been augmented through increasing responsibilities of specific assignments and department management. Estimating capabilities have ranged from conceptual/rough order of magnitude to detailed/lump sum turn key.

Job Titles:

• Program Expert & Consultant, India / Gm Fb Tw in

Dhruva has over 23 years of experience covering railway projects (13 years) including 9 years in Metro rail projects, other infrastructure projects (4 years) and building projects (6 years) in India, across planning, design and construction functions. Key skills are planning, scheduling and monitoring; quantity and cost estimation, tendering and contract management. Can perform Project Controls for all system works, integrating civil, mechanical and electrical engineering activities. Also experienced in route alignment design; preparation of technical specifications and detailed Project reports. He has worked at feasibility, tendering, pre and detailed engineering and construction stages of projects. Since past 21 years he is associated with with a leading engineering consultancy firms of India.

Job Titles:

• Member of the Board of Advisors
• Director at Christ Royal Centre for Applied Cost Engineering, Nigeria / Gm Fb Tw in

Benjamin has over 15 years of experience with MSc in Computer Integrated Manufacturing and Phd in Knowledge Engineering & Management from Cranfield University, UK. During his academic career, benjamin has worked on various theories such as Research Knowledge Elicitation Tools and Techniques, eXpert Process knowledge Analysis Technique (XPAT), Knowledge Model for Managing Schedule Disturbance in Steelmaking, Knowledge Model with a Decision Support Tool using Gensym G2 Expert System software and a paper based Tool to capture and reuse expert knowledge. He has also successfully validated XPAT techniques and tool with case studies. He has worked with Shell on various cost and schedule assignments and current heads a research center dedicated to Applied Cost Engineering and its training.

Job Titles:

• Member of the Board of Advisors
• Senior Technical Advisor - PTMC, Jakarta Indonasia / Gm Fb Tw in

Paul has over 35 years of experience and along with working with PTMC, is also an adjunct professor, Project and Program Management, at the SKEMA School of Business, Paris, France. www.skema.edu/en and develops and teaches graduate level curricula in Asset and Project Management for Western Australia University, Perth. www.blendedlearning.ecm.uwa.edu.au For 17+ years, he has been providing Project Management training and consulting throughout South and Eastern Asia, the Middle East and Europe. He is also active in the Global Project Management Community, serving as an Advocate for and on behalf of the global practitioner. He does so by playing an active professional role in the Association for the Advancement of Cost Engineering International, (AACE); Construction Specifications Institute (CSI) and the Construction Management Association of America, (CMAA). He also sits on the Board of Directors of the Global Alliance for Project Performance Standards (GAPPS), www.globalpmstandards.org, Sydney, Australia.

Job Titles:

• Member of the Core Team
• Director - South East Asia, Turner & Townsend, Singapore / Gm Fb Tw in

John has over 20 years of experience in various Project Controls functions with specialisation in Delay Analysis, Project Controls Management, Project Planning & Genetic Algorithms applied to Project Schedule Optimisation. Before joining Hill, John was associated with Worley Parsons (Manager of Project Services, Western Australia), CB&I (Director of Project Controls, EAME region), SNC Lavalin (Engineering Manager and Project Manager, Johannesburg) to name a few. John has done his MSc and Phd and currently pursuing his LLM in Construction Law and Arbitration at RGU. He is also a CEng (Chartered Engineer) with Engineering Council (EC) UK and holds a FACostE with ACostE (Association of Cost Engineering), UK .

Job Titles:

• Member of the Board of Advisors
• President - Gray Construction Consulting & Associates, USA / Gm Fb Tw in

Mark has over 30 years of office & field experience in estimating, bidding and managing large commercial, heavy civil, industrial, power, marine government construction projects along with construction dispute resolution. He has reviewed, analyzed & reported on a broad range of construction projects located in the U.S., Europe and the Middle East. His assignments include being chosen to lead a team of engineers and schedulers from the Storebaelt West Bridge JV partners located in Amsterdam & Nyborg Denmark performing a schedule impact analysis on a 13,000+ activity CPM network w/ narration that served as the foundation of the Joint Venture's successful claim. Mark has also participated in settlement negotiations, mediation and testified as an expert witness in AAA arbitration, ICC arbitration on separate cases in London and Paris, U.S. State and Federal Court and the Pennsylvania State Court of Claims. Mark is considered as expert in Forensic Services covering review and analysis of the contract, estimate & budget; earned value; resourcing; CPM baseline schedule, updates and as-built; scope modification(s); productivity & inefficiency, CPM schedule analysis and case mgmt incldg discovery, document control, data bases and demonstrative exhibits

Job Titles:

• Member of the Board of Advisors
• President - ICS Global, USA / Gm Fb Tw in

Murray with over 25 years of experience under his belt is globally respected Project Controls professional for his authority on Construction scheduling practices. He currently heads ICS-Global, International Center for Scheduling, Inc, providing a wide variety of products and services of importance to construction Scheduling Practitioners, and their customers. He is also a author of : "Faster Construction Projects with CPM Scheduling (McGraw-Hill, 2007), the #2 construction scheduling book according to Amazon.com. In past he was associated with PMI - College of scheduling as Director of Scheduling Excellence Initiative. Murray is also a frequent lecturer and author on various scheduling topics along with creator of Momentum Management & Dilemma Forecasting.

Job Titles:

• Contracts and Controls Manager at ASA, Egypt / Gm Fb Tw in

Nader is an Egyptian Civil engineer with extensive experience in the field of Project Management including Claims Management, Construction Planning, Estimating and Value Engineering Studies. He is also registered as an expert in the Cairo Regional Center for International Commercial Arbitration (CRCICA).

Job Titles:

• Director at Eastwood Harris Pty. Ltd, Australia

Paul E Harris a director of Eastwood Harris since 1993 providing Programme and Project management consulting to companies in the areas of establishing and running programme and project controls systems. This has included assisting in the evaluation, selection and implementation of programme and project controls software, training and the running of programme and project controls systems with a strong emphasis on the integration of Oracle Primavera Inc and Microsoft Project software into corporate programme and project management systems.

With a successful record of executive positions with high profile companies, Pedram has considerably contributed to the planning and risk disciplines of a number of infrastructure and major projects across Australia and overseas. He is also an industry Innovation Award Winner from Road & Traffic Authority (RTA) and Leighton Contractors for his exceptional knowledge and practical applications of statistics and Primavera solutions for project time and risk management. Currently as the Head of Planning & Risk with UGL Limited, Pedram is leading project planning and risk management function to engineering line of business in the planning, estimation, management and delivery of UGL's wide range of projects across Water, Power Generation, Power Systems, Coal, Iron Ore, LNG/Oil & Gas and Nitrates from bid to close.

Job Titles:

• Director - Steve Wake Projects Limited, UK / Gm Fb Tw in

Steve Wake is a management consultant, specialized in earned value project management. He provides advice, guidance, and training. He is the Chairman of the APM Earned Value Management Specific Interest Group and director of Steve Wake Projects, Ltd. He chairs, speaks, writes, and is an accomplished event organizer. He is seen as a UK expert and champion of the subject of earned value. He established reciprocity between the US ANSI EV Guideline and the UK APM Guideline. Steve also chairs the APM SIG-Steering Group with oversight of all APM's SIG activity and strategy. He is a member of the APM Knowledge Directorate and participates on the APM Nominations committee. In 2009, he helped found the EVA-Europe initiative and chaired the first conference at CERN Geneva and he is a member of the core author group for the revision of the PMI Second Edition of the Practice Standard for Earned Value Management.