HERUD KG

Before repairing the damaged spots, the shuttering has to be cleaned of concrete and dirt with the appropriate tools and aids... The Router with rondo HM-switchblade cylinderhead drill must be adjusted to the corresponding thickness of the rondoplex plywood repair discs at the depth regulator of the machine. Do a testrun on old shuttering. After the adjustment of the drilling depth and a testrun, drill the hole on the damaged spot and turn off the machine... If damages of the surface of shutterings are not repaired professionally before using the shuttering again, the concrete surface will show the outlines of the damage. The marks on the formwork surface have to be removed mechanically under immense effort. Repeatedly used unrepaired shuttering leads to more costly repairing of the surface of concrete due to deeper damages on the formwork surface.

Also known as: Herud

Registration numbers: HRA 290 239 (W)

VAT numbers: DE187 789 375

Primary location: Columbia United States