PLASTIC MISTING NOZZLES

Plastic Misting Nozzles are also referred to as spray nozzles, atomizers, sprayers, misters or even fog nozzles, although the term "fog nozzle" normally refers to a metal nozzle that produces much finer droplets and is designed to operate at higher pressures than the typical plastic misting nozzle... Misting Nozzles are usually small plastic, metal, or even composite fittings, sometimes threaded and sometimes flanged. They have a small orifice in the center where the atomized water exits the nozzle. Better quality "plastic" misting nozzles are normally made from "acetal" due to its wide working temperature range, chemical resistance, and durability... The plastic misting nozzles are normally rated for 30-250 PSI, while the brass and stainless steel nozzles are rated at 45-1000+ PSI. Always confirm the rating of the nozzle before using it in a pressurized application as not all models are the same. Nozzles that are used at too high a pressure can either shatter or be forced out of the..